Program Minitor V Narrowband
Bandwidth Options Minitor VI Improved paging sensitivity To receive signals consistently over a wide area, even with a weak signal. Expanded alert tones As many as 12 programmable tones, including new musical options, are available to communicate specific alerts. Tremendous stored voice capacity Recording time increased to eight minutes. Rugged dependability Sturdy housing and solid, responsive knob action.
This is a guide to program Motorola Minitor V (5) pagers. To program a Minitor V pager you will need the hardware and software.
The first thing to do is place the pager into programming mode. Insert a good battery into the Minitor V pager and turn the pager off. Change the switch position to 'C'. Hold down the reset button then turn the pager on while holding the button down. Release the reset switch. You should hear a continuous beep for 3 seconds. The Minitor V pager is now in programming mode Next read the Minitor V pager.
Minitor V Pager
If you were successful you will see the following. The 'red text' are our comments. At the top click on 'Channel F1' this will bring you to the second tab shown below. This is where you enter the Minitor 5 frequency and paging tones. If you have a two channel pager, select 'Channel F2' (not shown) to enter frequency 2 information. The 3rd tab has the Minitor V programming options. We recommend the settings shown below.
The 4th tab sets the Minitor V switch settings.