Folder.exe Removal Tool
This tool is designed to remove infections of the following threats: W32.HLLW.Antinny W32.HLLW.Antinny.E W32.HLLW.Antinny.G W32.Antinny.K W32.Antinny.Q W32.Antinny.AX W32.Antinny.BF Trojan.Sientok Trojan.Exponny Important: If you are on a network or have a full-time connection to the Internet, such as a DSL or cable modem, disconnect the computer from the network and Internet. Disable or password-protect file sharing, or set the shared files to Read Only, before reconnecting the computers to the network or to the Internet. Because this worm spreads by using shared folders on networked computers, to ensure that the worm does not reinfect the computer after it has been removed, Symantec suggests sharing with Read Only access or by using password protection. For instructions on how to do this, refer to your Windows documentation, or the document: How to configure shared Windows folders for maximum network protection. If you are removing an infection from a network, first make sure that all the shares are disabled or set to Read Only. This tool is not designed to run on Novell NetWare servers.
To remove this threat from a NetWare server, first make sure that you have the current virus definitions, and then run a full system scan with the Symantec antivirus product. How to download and run the tool Important: You must have administrative rights to run this tool on Windows NT 4.0, Windows 2000, or Windows XP.
Note for network administrators: If you are running MS Exchange 2000 Server, we recommend that you exclude the M drive from the scan by running the tool from a command line, with the Exclude switch. For more information, read the Microsoft knowledge base article: XADM: Do Not Back Up or Scan Exchange 2000 Drive M (Article 298924). Follow these steps to download and run the tool: Download the FxAntiny.exe file from: Save the file to a convenient location, such as your Windows desktop. Optional: To check the authenticity of the digital signature, refer to the 'Digital signature' section later in this writeup. Note: If you are sure that you are downloading this tool from the Security Response Web site, you can skip this step. If you are not sure, or are a network administrator and need to authenticate the files before deployment, follow the steps in the 'Digital signature' section before proceeding with step 4. Close all the running programs.
If you are on a network or if you have a full-time connection to the Internet, disconnect the computer from the network and the Internet. If you are running Windows Me or XP, turn off System Restore. For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles: How to disable or enable Windows Me System Restore How to turn off or turn on Windows XP System Restore Locate the file that you just downloaded. Double-click the FxAntiny.exe file to start the removal tool. Click Start to begin the process, and then allow the tool to run.
NOTE: If you have any problems when you run the tool, or it does nor appear to remove the threat, restart the computer in Safe mode and run the tool again. Restart the computer. Run the removal tool again to ensure that the system is clean.
New Folder Virus Removal Tool
If you are running Windows Me/XP, then reenable System Restore. If you are on a network or if you have a full-time connection to the Internet, reconnect the computer to the network or to the Internet connection.
System Folder Removal
Run LiveUpdate to make sure that you are using the most current virus definitions. When the tool has finished running, you will see a message indicating whether the threat has infected the computer. The tool displays results similar to the following: Total number of the scanned files Number of deleted files Number of repaired files Number of terminated viral processes Number of fixed registry entries What the tool does The Removal Tool does the following: Terminates the associated processes Deletes the associated files Deletes the registry values added by the threat Switches The following switches are designed for use by network administrators: SwitchDescription /HELP, /H, /?Displays the help message. /NOFIXREGDisables the registry repair (We do not recommend using this switch). /SILENT, /SEnables the silent mode. /LOG=PATH NAMECreates a log file where PATH NAME is the location in which to store the tool's output. By default, this switch creates the log file, FxAntiny.exe.log, in the same folder from which the removal tool was executed.
/MAPPEDScans the mapped network drives. (We do not recommend using this switch. See the following Note.) /STARTForces the tool to immediately start scanning. /EXCLUDE=PATHExcludes the specified PATH from scanning. (We do not recommend using this switch. See the following Note.) /NOCANCELDisables the cancel feature of the removal tool.
/NOFILESCANPrevents the scanning of the file system. /NOVULNCHECKDisables checking for unpatched files. Important: Using the /MAPPED switch does not ensure the complete removal of the virus on the remote computer, because: The scanning of mapped drives scans only the mapped folders. This may not include all the folders on the remote computer, which can lead to missed detections. If a viral file is detected on the mapped drive, the removal will fail if a program on the remote computer uses this file. Therefore, you should run the tool on every computer. The /EXCLUDE switch will only work with one path, not multiple.
An alternative is the /NOFILESCAN switch followed by a manual scan with AntiVirus. This will let the tool alter the registry. Then, scan the computer with AntiVirus with current virus definitions. With these steps, you should be able to clean the file system. The following is an example command line that can be used to exclude a single drive: 'C: Documents and Settings user1 Desktop FxAntiny.exe' /EXCLUDE=M: /LOG=c: FxAntiny.exe.txt Alternatively, the command line below will skip scanning the file system, but will repair the registry modifications. Then, run a regular scan of the system with proper exclusions: 'C: Documents and Settings user1 Desktop FxAntiny.exe' /NOFILESCAN /LOG=c: FxAntiny.exe.txt Note: You can give the log file any name and save it to any location.
Digital signature For security purposes, the removal tool is digitally signed. Symantec recommends that you use only copies of the removal tool that have been directly downloaded from the Symantec Security Response Web site. If you are not sure, or are a network administrator and need to authenticate files before deployment, you should check the authenticity of the digital signature. Follow these steps: Go to Download and save the Chktrust.exe file to the same folder in which you saved the removal tool. Note: Most of the following steps are done at a command prompt.
If you downloaded the removal tool to the Windows desktop, it will be easier if you first move the tool to the root of the C drive. Then save the Chktrust.exe file to the root of C as well. (Step 3 to assume that both the removal tool and Chktrust.exe are in the root of the C drive.) Click Start Run. Type one of the following: Windows 95/98/Me: command Windows NT/2000/XP: cmd Click OK. In the command window, type the following, pressing Enter after typing each line: cdcd downloads chktrust -i FxAntiny.exe You should see one of the following messages, depending on your operating system: Windows XP SP2: The Trust Validation Utility window will appear. Under Publisher, click the Symantec Corporation link. The Digital Signature Details appears.
Verify the contents of the following fields to ensure that the tool is authentic: Name: Symantec Corporation Signing Time: 04:10:09 PM All other operating systems: You should see the following message: Do you want to install and run 'W32.Antinny Removal Tool' signed on Sunday, April 30, 2006 04:10:09 AM PST and distributed by Symantec Corporation? Notes: The date and time in the digital signature above are based on Pacific time.
They will be adjusted your computer's time zone and Regional Options settings. If you are using Daylight Saving time, the displayed time will be exactly one hour earlier. If this dialog box does not appear, there are two possible reasons: The tool is not from Symantec: Unless you are sure that the tool is legitimate and that you downloaded it from the legitimate Symantec Web site, you should not run it. The tool is from Symantec and is legitimate: However, your operating system was previously instructed to always trust content from Symantec. For information on this and on how to view the confirmation dialog again, read the document: How to restore the Publisher Authenticity confirmation dialog box. Click Yes or Run to close the dialog box.
Type exit, and then press Enter. (This will close the MS-DOS session.) How to restore the Upfolder.txt upload configuration file for the Winny Program.
The removal tool does not restore the original Upfolder.txt configuration file in the Winny Program folder. We recommend that you edit the Upfolder.txt to remove confidential information that was shared by the malware. Open Windows Explorer.
Go to Tools Menu Folder Options View. Click Show hidden files and folders and then click OK. Navigate to the Winny program folder. Locate the Upfolder.txt in the folder and open it with a text editor such as Notepad. Once opened, find any 'Path=' lines in the text. These 'Path=' lines point to a folders whose contents are currently being shared on the Winny network. There may be more than one 'Path=' line in the file.
Delete the 'Path=' line only if you do not want information in this folder shared. Save and close Upfolder.txt Exit the text editor. Exit Windows Explorer.
Computer and USB drive infected with New folder virus? I have a problem with “New Folder.exe” in pen drive and local drive and I think it is a virus.
I’ve tried using an Antivirus program to scan and remove the virus but it keeps coming back. It is messing up my computer I need help getting it off! -mathew New Folder.exe virus is a more severe virus with some unusual effects. The virus hides folders in USB drives, disables task manager, disables registry editor, disables folder options, and disables run option from start menu. Virus creates exe files like the icon of folders with the same name as the name of the folder in hard disk and USB storage device, it also consumes more than 50% of your processor usage so slows down your computer. The Newfolder virus is not easy to be removed, even re-formatting the drive, it always come back after reboot. Let’s see how we can remove this virus in two ways: manually and automatically with folder virus removal tool, and get the hidden files and folders back.
How to remove New folder.exe virus manually? Note: Manual removal of folder viruses may be difficult, as the removal process requires knowledge of the operating system command prompt. If not performed properly, your system and data in USB flash might experience permanent damage. We highly recommend you use a good virus remover to automatically detect and remove the new folder.exe virus.
Search for autorun.inf, svichossst.exe, newfolder.exe, regsvr.exe files on USB drive and system, and then delete them. Remove the following keys from registry HKEYCURRENTUSER Software Microsoft Windows CurrentVersion Policies System “@”= HKEYCURRENTUSER Software Microsoft Windows CurrentVersion Run “Yahoo Messenger”= HKEYLOCALMACHINE SOFTWARE Microsoft Windows NT CurrentVersion Winlogon “Shell”=”regsvr.exe “ Do a cold reboot. The instructions above is the removal method for some common folder viruses, if you fail to delete virus manually, try the effective folder virus removal tool. Use effective New Folder virus removal tool. USB Virus Scan is an effective antivirus for USB security, it can detect and remove virus/worms which may be ignored by Avast, Avg, etc in USB flash drive and USB disk automatically, to prevent virus infection from USB port, also it can delete virus in the infected system such as new folder.exe virus. System errors such as registry disabled, folder option missing could also be healed by the virus removal tool.
Remove the folder.exe virus in USB drive. 2. Launch it after finishing the installation, you will see the virus detection wizard: 3. Click “Next” button, and insert your USB drive or USB disk into computer, USB Virus Scanner will execute fully check of the drive and remove folder.exe virus on it. Meanwhile, the removal tool modify the hidden folders attribute to make them visible.
Clean New Folder.exe virus in computer. If suspicious files such as Newfolder.exe, autorun.inf, svichossst.exe appear again and again after removal, that means your computer has infected by viruses from pen drive. The viruses in system will copy themselves to the all drives connected to the USB port.
Therefore, you must clean new folder virus in system first, otherwise virus in flash drive such as ipod could not be removed completely. Cancel the virus detection wizard, Aden click the Start button 3.
Detection and removal of folder.exe virus in local drives and memory will be done automatically. Fix errors caused by NewFolder.exe virus When your computer get infected with the NewFolder.exe virus, the virus will corrupt your system. Task manager, registry editors, folders and files in USB drive will be hidden by viruses, The new folder virus removal tool can help you to fix all errors by one click. Launch USB Virus Scan. Click FixSystem button. Select the items you need to fixed and click Apply. Reboot system and all things are done.
Related Articles Unhide folders in USB drives.